TP-Link Wi-Fi Extender Red Light blinking | +1-800-487-3677 | TP-Link Guide

Our expert team is always ready to help with Tp-link wifi extenders red light blinking problem and troubleshooting all related issue. . You may call on +1-800-487-3677
If you want to expand your wireless network, reduce interference and make the Wi-Fi signal stronger, the TP-Link Wi-Fi extender is the right choice. However, there are situations when it can signal that there is something wrong and that it requires your immediate attention. In this case, we are going to cover the TP-Link Wi-Fi extender red light, what might be the causes for it, and how to fix it
The red light on your TP-Link Wi-Fi extender usually indicates that the Wi-Fi signal is too weak. To be more precise, if the signal strength is at 30% or less you will see the red light.
And now let’s see what you can do to get rid of it and see the green light again.

How to Fix the TP-Link Wi-Fi Extender Red Light?
Unplug It and Plug It Back In
The first thing to try is pretty simple and very effective. All you need to do is to unplug the extender from the electrical outlet. Leave it disconnected for 10-20 seconds and then plug it back into the wall outlet. Now just give it some time to boot up completely and connect. You should see the green lights pretty soon.
However, if the red light is still on after you do this, try the following.
Move It Closer
We have mentioned that the red light indicates that the Wi-Fi signal is too weak. This might have happened if you have moved or replaced the router recently. Also, maybe a new device is causing interference and affecting the Wi-Fi signal strength, so you will have to investigate this as well.
You can also check our link :- https://medium.com/@tplinksetup20/tp-link-wifi-extender-red-light-blinking-1-800-487-3677-tp-link-guide-27e855c332b2
#tplinkwifisetup
#tplinkwifiextendersetup
#tplinkdecosetup
#tplinkroutersetup
#tplinkwifiextenderredlightblinking